Dolby Laboratories DP524 Instrukcja Użytkownika Pobierz pdf (Strona 6)

DP571 Dolby

E Encoder User’s Manual

Regulatory Notices

USA

This equipment has been tested and found to comply with the limits for a Class A digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference when the equipment is operated in a commercial environment. This

equipment generates, uses, and can radiate radio frequency energy and, if not installed and used

in accordance with this instruction manual, may cause harmful interference to radio

communications. Operation of this equipment in a residential area is likely to cause harmful

interference in which case the user is required to correct the interference at his or her own

expense.

Exposed portions of the power supply assembly are electrically “hot.” To reduce risk of electric

shock, the power cord must be disconnected when the power supply assembly is removed.

The ground terminal of the power plug is connected directly to the chassis of the unit. For

continued protection against electric shock, a correctly wired and grounded (earthed) three-pin

power outlet must be used. Do not use a ground-lifting adapter and never cut the ground pin on

the three-prong plug.

Canada

This Class A digital apparatus complies with Canadian ICES-003.

The power cord, Dolby Part No. 92021, supplied for use in Europe is not suitable for use in the UK.

To use the cord in the UK cut off the CEE7/7 plug and replace with an approved BS 1363 13A plug:

• The core, colored green and yellow, must be connected to the terminal in the plug that is

marked with the letter E or by the ground symbol or colored green or green and yellow.

• The core, colored blue, must be connected to the terminal that is marked with the letter N or

colored black.

• The core, colored brown, must be connected to the terminal that is marked with the letter L

or colored red.

• This apparatus must be earthed.

This equipment complies with the EMC requirements of EN55103-1:1996 (Emission) and

EN55103-2:1996 (Immunity) when operated in an E2 environment in accordance with this

manual. The power cord with CEE7/7 plug, Dolby part no. 92021, supplied with this unit must

be used with a polarized socket, or the socket must be supplied via a residual current breaker

(RCD).

WARNING: Troubleshooting must be performed by a trained technician. Do not

attempt to service this equipment unless you are qualified to do so.

Check that the correct fuses have been installed. To reduce the risk of fire, replace

only with fuses of the same type and rating. See page ix for fuse details.

1 2 3 4 5 6 7 8 9 10 11 ... 44 45

Brak uwag

Dolby Laboratories DP524 Instrukcja Użytkownika Strona 6