Dolby Laboratories DM100 Instrukcja Użytkownika Pobierz pdf (Strona 7)

Dolby Model DP583 Frame Synchronizer User’s Manual

vii

Regulatory Notices

FCC

This equipment has been tested and found to comply with the limits for a Class A digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference when the equipment is operated in a commercial environment. This

equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in

accordance with this instruction manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful interference in which

case the user will be required to correct the interference at his or her own expense.

Canada

This Class A digital apparatus complies with Canadian ICES-003.

WARNING:

Troubleshooting must be performed by a trained technician. Do not attempt to

service this equipment unless you are qualified to do so.

Check that the correct fuses have been installed. To reduce the risk of fire,

replace only with fuses of the same type and rating.

This equipment has more than one power suppl

. To reduce the risk o

electric

shock, disconnect both power supply cords before servicing.

Exposed portions of the power supply assembly are electrically "hot." In order to reduce the risk of

electrical shock, the power cord MUST be disconnected when the power supply assembly is removed.

The ground terminal of the power plug is connected directly to

the chassis of the unit. For continued protection against

electric shock, a correctly wired and grounded (earthed) three-

pin power outlet must be used. Do not use a ground-lifting

adapter and never cut the ground pin on the three-prong plug.

The power cord Dolby part 92021 supplied for use in Europe is not suitable for use in the UK. To

use the cord in the UK cut off the CEE7/7 plug and replace with an approved BS 1363 13A plug:

• The green and yellow cord must be connected to the terminal in the plug identified by the

letter E or by the earth symbol

or coloured green or green and yellow.

• The blue cord must be connected to the terminal that is marked with the letter N or coloured

black.

• The brown cord must be connected to the terminal that is marked with the letter L or

coloured red.

This apparatus must be earthed.

MAIN

1 2 3 4 5 6 7 8 9 10 11 12 ... 35 36

Brak uwag

Dolby Laboratories DM100 Instrukcja Użytkownika Strona 7